Meet the new Boss! A dual-mode anchor designed for powerboats.Using the latest technology, Boss Anchors easily anchor and keep your powerboat safe. The shank has been specifically designed to conform to bow rollers where the anchor comes through the deck.Performing equally as well on larger yachts, the Boss features a patented shackle Preventer which by quickly loosening and redocking, changes the anchor configuration from sand/mud to rocks/coral.Huge surface area to weight ratio means youll hold firmly in place overnight. Conforms to most fairleads and rollers.Key FeaturesDual shank anchoring: The Manson Boss has dual modes of operation in one slotted shank. The strengthened high tensile steel shank was designed using Finite Element Analysis and optimized for maximum strength. Fabricated from Lloyd's Register certified high tensile steel, it is at minimum 800mpa high tensile steel. The shank clearance is streamlined to conform to powerboat fairleads and bow rollers.Manson shackle Preventor: The Manson Boss has one slot in the shank with two docking stations to enable you to use you anchor in all seabeds. The patented Preventor quickly unscrews and docks on the alternate station to transform the anchor from a fixed shank to a sliding shank for operation in foul ground. The Preventor is captive which means you won't lose it.Raises flaps/trim flaps: Ensure the fastest set in even the most demanding seabed conditions. Raising the holding power by forcing the flukes downwards creates a minimum of 28% deeper setting than other new-generation anchors.Double reinforced nose: Nose based tip weight concentration enabled by double thickness laminate layer (DTLL) technology for fastest set possible.Fluke (workhorse and holding power): Reinforced double-skinned laminated toe provides an extremely strong forward section of the anchor where it attacks the seabed, its seabed penetrating ability relies on this strength. Manson presses the concave shape into the fluke. This means the anchor cups the seabed and sets much faster. Manson uses a 150 ton presses to shape this anchor.Bow-roller compatibility: Fits all standard bow-rollers, designed specifically for powerboats.Winglets: For immediate setting (setting and